Magic Powder RICH To Make Hand Molds

Only 3 Remaining

Sold More Than 5 Times

The product is available in an aluminum envelope
Used by adding water to make hand molds
Approximately 1-1.5 liters of water is added (using more water at a temperature of 20-25°C will increase the solidification period) is added to a container containing 450 grams of powder and mixed
It is recommended to use a blender because the powder will dissolve faster and it will be a more homogeneous mixture
The mixing process must be quick
Mix until the mixture turns pink from violet (about 1 minute)
A sufficient amount of baby oil or hand cream is applied to the hand or foot from which the mold will be prepared
When the mixture turns pink, immerse the hand(s) in the mixture in the container
The hand should be inserted close to the depth but not touching the bottom
Place the hand in the mixture without stirring until the entire mixture turns white (about 2-3 minutes)
The hand is removed from the frozen mixture smoothly and without damaging the shape of the mold, and the mold is then ready for use
The mold is used by making a mixture of cement or gypsum, pouring it into the made mold, waiting 24 hours for it to dry, then gently removing the model from the mold